Hot potable water preparation in ships requires lots of energy from the power plant; this is particularly true in modern cruise ships with a high demand of potable water for people, restaurants, spa and pools. Usually the required amount of hot water is instantly produced using a number of different energy sources available on board. However, the use of direct heaters on peak demand conditions increases fuel consumption and greenhouse gas emissions. This is especially important in the case of ship in port configuration, due to the reduced number of active engines and therefore the reduced amount of waste heat from the cooling line usually employed for this task. This paper investigates possible solutions to size a hot water thermal storage in order to compensate the mismatch between heat generation during cruise and heat required during ship in port configuration. The performances of different solutions are compared using dynamic thermal simulations of the ship’s hot water distribution system with different regimes and time dependent heat requirements. Moreover it will be introduced the use of PCM materials with the aim to further improve system’s performance.

Potential of thermal storage for hot potable water distribution in cruise ships

Manzan, Marco
Membro del Collaboration Group
;
Pezzi, Amedeo
Membro del Collaboration Group
;
Zorzi, Ezio Zandegiacomo de
Membro del Collaboration Group
;
ZENTILOMO, LUCIO;
2018-01-01

Abstract

Hot potable water preparation in ships requires lots of energy from the power plant; this is particularly true in modern cruise ships with a high demand of potable water for people, restaurants, spa and pools. Usually the required amount of hot water is instantly produced using a number of different energy sources available on board. However, the use of direct heaters on peak demand conditions increases fuel consumption and greenhouse gas emissions. This is especially important in the case of ship in port configuration, due to the reduced number of active engines and therefore the reduced amount of waste heat from the cooling line usually employed for this task. This paper investigates possible solutions to size a hot water thermal storage in order to compensate the mismatch between heat generation during cruise and heat required during ship in port configuration. The performances of different solutions are compared using dynamic thermal simulations of the ship’s hot water distribution system with different regimes and time dependent heat requirements. Moreover it will be introduced the use of PCM materials with the aim to further improve system’s performance.
2018
Pubblicato
https://www.sciencedirect.com/science/article/pii/S1876610218303345
File in questo prodotto:
File Dimensione Formato  
1-s2.0-S1876610218303345-main.pdf

accesso aperto

Descrizione: Articolo presentato ATI 2018
Tipologia: Documento in Versione Editoriale
Licenza: Creative commons
Dimensione 1.15 MB
Formato Adobe PDF
1.15 MB Adobe PDF Visualizza/Apri
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11368/2930822
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 8
  • ???jsp.display-item.citation.isi??? 6
social impact