In current design practice for seismic resistant steel braced frames, general rules and standard provisions are aimed to ensure a structural behaviour for beam-to-column joints of non-braced spans as close as possible to perfect hinges. This is done to prevent any kind of interaction with the bracing systems, in particular under horizontal loads. However, the global performance of composite joints is markedly affected by the structural interaction between the concrete slab and the steel components and - especially during seismic events - struts can occur in the slab at the beam-to-column intersection. In this paper, the possibility of realizing a composite joint that behaves as moment-resisting under gravitational loads and essentially as hinged under horizontal loads is investigated. Aiming to assess the actual slab-interaction effects on the overall response, a full 3D Finite Element (FE) model representative of a beam-to-column composite joint taking part of a braced frame is described in ABAQUS and validated towards past full-scale experiments. A parametric study is hence proposed, by accounting for three geometrical configurations, being characterized by (i) isolated slab with absence of rebar continuity (i.e. fully disconnected slab and steel joint only), (ii) presence of slab with partial column interaction (i.e. isolated slab and continuity of rebar), (iii) presence of fully interacting slab. It is shown that, if properly detailed, a joint with isolated slab and continuous rebars can be used in nonbraced spans of composite braced frames without affecting the behaviour of the bracing system (i.e. as in presence of a hinge). Nonetheless, the composite beam can be designed as continuous on multiple supports under vertical loads, hence leading to a reduction of the steel cross-sectional size.

Numerical assessment of slab-interaction effects on the behaviour of steel-concrete composite joints

AMADIO, CLAUDIO;BEDON, CHIARA;FASAN, MARCO
2017-01-01

Abstract

In current design practice for seismic resistant steel braced frames, general rules and standard provisions are aimed to ensure a structural behaviour for beam-to-column joints of non-braced spans as close as possible to perfect hinges. This is done to prevent any kind of interaction with the bracing systems, in particular under horizontal loads. However, the global performance of composite joints is markedly affected by the structural interaction between the concrete slab and the steel components and - especially during seismic events - struts can occur in the slab at the beam-to-column intersection. In this paper, the possibility of realizing a composite joint that behaves as moment-resisting under gravitational loads and essentially as hinged under horizontal loads is investigated. Aiming to assess the actual slab-interaction effects on the overall response, a full 3D Finite Element (FE) model representative of a beam-to-column composite joint taking part of a braced frame is described in ABAQUS and validated towards past full-scale experiments. A parametric study is hence proposed, by accounting for three geometrical configurations, being characterized by (i) isolated slab with absence of rebar continuity (i.e. fully disconnected slab and steel joint only), (ii) presence of slab with partial column interaction (i.e. isolated slab and continuity of rebar), (iii) presence of fully interacting slab. It is shown that, if properly detailed, a joint with isolated slab and continuous rebars can be used in nonbraced spans of composite braced frames without affecting the behaviour of the bracing system (i.e. as in presence of a hinge). Nonetheless, the composite beam can be designed as continuous on multiple supports under vertical loads, hence leading to a reduction of the steel cross-sectional size.
2017
10-ott-2017
Pubblicato
http://www.sciencedirect.com/science/article/pii/S0143974X17304200
File in questo prodotto:
File Dimensione Formato  
jcsr-composite joint.pdf

Open Access dal 11/10/2019

Tipologia: Documento in Versione Editoriale
Licenza: Digital Rights Management non definito
Dimensione 4.46 MB
Formato Adobe PDF
4.46 MB Adobe PDF Visualizza/Apri
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11368/2911168
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 38
  • ???jsp.display-item.citation.isi??? 32
social impact