The “chip-on-sensor” concept of this detector minimizes the distance of the signal propagation from the double-sided silicon detector strips to the readout chips and thus reduces noise from strip capacitance. One half of the detector is built, the second half is being assembled at the time of writing. Prototypes have been tested in several test beams as well as in the so-called Phase 2 setup inside the detector structure. First results from a commissioning run of the Belle-II prototype SVD detector are presented. The measured signal-to-noise and timing performance are found to be according to design specifications.
The Belle II silicon vertex detector: Assembly and initial results
Lanceri, L.;Vitale, L.;
2018-01-01
Abstract
The “chip-on-sensor” concept of this detector minimizes the distance of the signal propagation from the double-sided silicon detector strips to the readout chips and thus reduces noise from strip capacitance. One half of the detector is built, the second half is being assembled at the time of writing. Prototypes have been tested in several test beams as well as in the so-called Phase 2 setup inside the detector structure. First results from a commissioning run of the Belle-II prototype SVD detector are presented. The measured signal-to-noise and timing performance are found to be according to design specifications.File in questo prodotto:
File | Dimensione | Formato | |
---|---|---|---|
1-s2.0-S0168900218310258-main.pdf
Accesso chiuso
Tipologia:
Bozza finale post-referaggio (post-print)
Licenza:
Copyright Editore
Dimensione
928.75 kB
Formato
Adobe PDF
|
928.75 kB | Adobe PDF | Visualizza/Apri Richiedi una copia |
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.