One of the main challenges in the roadmap to the realization of fusion energy is to develop a heat and power exhaust system able to withstand the large loads expected in the divertor of a fusion power plant. The challenge of reducing the heat load on the divertor targets is addressed, within the mission 2 ‘Heat-exhaust systems’, through the investigation of divertor configurations alternative to the standard Single Null (SN), such as the Snowflake (SF), Double Null (DN), X and Super-X (SX) divertors. This paper focuses on a preliminary engineering assessment of the alternative configurations proposed for the EU DEMO reactor. Starting from the description of the optimized plasma shape developed for each configuration, the 3D geometrical description of the Magnet System and of the main Mechanical Structures (Vacuum Vessel and in-vessel components) is presented. Based on the 3D geometry, the compatibility of the location and dimensions of ports with Remote Maintenance needs is discussed and possible design optimizations are proposed both for the Magnets system and the mechanical structures design. Finally, the various configurations are compared with regard to the engineering and feasibility aspects.
Preliminary engineering assessment of alternative magnetic divertor configurations for EU-DEMO
Marzullo D.
;
2020-01-01
Abstract
One of the main challenges in the roadmap to the realization of fusion energy is to develop a heat and power exhaust system able to withstand the large loads expected in the divertor of a fusion power plant. The challenge of reducing the heat load on the divertor targets is addressed, within the mission 2 ‘Heat-exhaust systems’, through the investigation of divertor configurations alternative to the standard Single Null (SN), such as the Snowflake (SF), Double Null (DN), X and Super-X (SX) divertors. This paper focuses on a preliminary engineering assessment of the alternative configurations proposed for the EU DEMO reactor. Starting from the description of the optimized plasma shape developed for each configuration, the 3D geometrical description of the Magnet System and of the main Mechanical Structures (Vacuum Vessel and in-vessel components) is presented. Based on the 3D geometry, the compatibility of the location and dimensions of ports with Remote Maintenance needs is discussed and possible design optimizations are proposed both for the Magnets system and the mechanical structures design. Finally, the various configurations are compared with regard to the engineering and feasibility aspects.File | Dimensione | Formato | |
---|---|---|---|
1-s2.0-S0920379620303045-main.pdf
Accesso chiuso
Tipologia:
Documento in Versione Editoriale
Licenza:
Copyright Editore
Dimensione
1.73 MB
Formato
Adobe PDF
|
1.73 MB | Adobe PDF | Visualizza/Apri Richiedi una copia |
11368_2972699_print.pdf
accesso aperto
Tipologia:
Bozza finale post-referaggio (post-print)
Licenza:
Digital Rights Management non definito
Dimensione
2.2 MB
Formato
Adobe PDF
|
2.2 MB | Adobe PDF | Visualizza/Apri |
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.