Evaluation of the Effectiveness of Overheated Dry-Saturated Steam Disinfection in the Control of the Dental Chair Contamination by Bioluminescence Analysis: A Pilot In Vitro Study

This study aimed to evaluate, through Adenosine triphosphate (ATP) bioluminescence analysis, the effectiveness of an overheated dry-saturated steam device (Polti Sani System) in decreasing the superficial microbial contamination on dental chairs' surfaces after 30 s steam disinfection (T1) in comparison to baseline (T0), i.e., at the end of an aerosol-generating procedure (AGDP), and to investigate any differences in the tested surfaces' contamination at T0 in relation to the surface's type. Three dental chair surfaces (scialytic lamp, control button panel, spit bowl), sized 10 x 10 cm each, were swabbed and analyzed before and after steam application. The procedure was repeated 20 times for a total of 60 before-after evaluations. Non-parametric tests were used to analyze Relative Light Unit (RLU) values and categorical data on the ATP molecules' amount detected on the tested surfaces. Statistically significant differences were found for both RLU and categorical data for all surfaces, and each type of surface evaluated at T0 and T1 (p < 0.05). Differences in RLU among the tested surfaces at T0 were not significant. By reducing the microbial contamination on the evaluated surfaces, the overheated dry-saturated steam system was an effective measure for the disinfection of the dental chair's surfaces after AGDPs, potentially reducing the risk of cross-infections.