The main goal of Anti-Shatter Films (ASFs) applications for structural glass is to create a barrier able to keep together fragments and minimize risk after any impulsive or static load that could lead glass to cracking. The influence of ASF properties on the flexural strength of coated glass elements is thus a relevant topic for safe design purposes, but still little investigated. To this aim, an experimental material investigation is presented in this paper, in order to achieve a good knowledge of common ASFs from a chemical point of view. Moreover, the deterioration of mechanical and adhesion characteristics for ASF samples subjected to different environmental conditions and accelerated ageing is also investigated, so as to simulate the effects of long-term exposure to high humidity (HU) or high temperature (HT). An experimental campaign carried out on 20 small scale ASF-coated glass specimens is finally presented, based on a three-point bending (3PB) test setup. The out-of-plane bending response of unaged or aged samples is performed by taking into account two different displacement-rate levels, to assess their performance and bending capacity under steady-static or impulsive loads. In both cases, the attention is given to the characterization of elastic and post-failure performances. Finally, support for the interpretation of experimental outcomes is derived from a simplified theoretical model of composite beam with partial connection, in order to estimate the shear stiffness of ASF adhesive components in the elastic stage.
Pre- and Post-Failure Experimental Bending Analysis of Glass Elements Coated by Aged Anti-Shatter Safety Films
Cozzarini, LucaMembro del Collaboration Group
;Bedon, Chiara
Membro del Collaboration Group
2022-01-01
Abstract
The main goal of Anti-Shatter Films (ASFs) applications for structural glass is to create a barrier able to keep together fragments and minimize risk after any impulsive or static load that could lead glass to cracking. The influence of ASF properties on the flexural strength of coated glass elements is thus a relevant topic for safe design purposes, but still little investigated. To this aim, an experimental material investigation is presented in this paper, in order to achieve a good knowledge of common ASFs from a chemical point of view. Moreover, the deterioration of mechanical and adhesion characteristics for ASF samples subjected to different environmental conditions and accelerated ageing is also investigated, so as to simulate the effects of long-term exposure to high humidity (HU) or high temperature (HT). An experimental campaign carried out on 20 small scale ASF-coated glass specimens is finally presented, based on a three-point bending (3PB) test setup. The out-of-plane bending response of unaged or aged samples is performed by taking into account two different displacement-rate levels, to assess their performance and bending capacity under steady-static or impulsive loads. In both cases, the attention is given to the characterization of elastic and post-failure performances. Finally, support for the interpretation of experimental outcomes is derived from a simplified theoretical model of composite beam with partial connection, in order to estimate the shear stiffness of ASF adhesive components in the elastic stage.File | Dimensione | Formato | |
---|---|---|---|
401_CGC8_Mattei+et+al (1).pdf
accesso aperto
Tipologia:
Documento in Versione Editoriale
Licenza:
Creative commons
Dimensione
1.42 MB
Formato
Adobe PDF
|
1.42 MB | Adobe PDF | Visualizza/Apri |
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.