Methane Partial Oxidation on NiCu-based catalysts

Catalytic Partial Oxidation of Methane (CPOM) to synthesis gas was studied over supported NiCu-based catalysts prepared by wet impregnation procedure. The samples were characterized by means of X-ray diffraction (XRD), N(2) physisorption, CO chemisorption experiments, temperature-programmed reduction (TPR), near edge (XANES) and extended (EXAFS) X-ray absorption spectroscopy. The catalyst stability was evaluated under severe reaction conditions. Reduced/preactivated Ni(10%)/Al(2)O(3) showscomplete CH(4) conversion above 700 degrees C, leading to a H(2)/CO ratio of about 2 in the temperature range 850-900 degrees C. Vice versa, the catalytic activity of the calcined/oxidized sample is appreciably shifted towards higher temperature. Both calcined and reduced Cu(10%)/Al(2)O(3) present very poor CPOM activity. Noteworthy, the performance of reduced Ni(5%)Cu(5%)/Al(2)O(3) is significantly improved with respect to reduced Ni(10%)/Al(2)O(3): the activity of bimetallic system is shifted by similar to 150 degrees C towards lower temperatures. Furthermore, temperature-programmed oxidation (TPO) experiments on CPOM-aged samples showed that carbon deposition on Ni(5%)Cu(5%)/Al(2)O(3) is negligible with respect to Ni(10%)/Al(2)O(3)